The Statguard^® Dissipative Floor Finish, sometimes referred to as an ESD Floor Polish, is an important component of any footwear/flooring system in the ESD Protected Area (EPA).

Statguard^® Floor Finish is used:

• to convert non-ESD floors to create a dissipative (< 1 x 10⁹ ohms) and low-tribocharging (<100 volts) floor or
• to protect and enhance existing ESD permanent flooring (vinyl, VCT, rubber, etc).

The cross-linked polymer coating meets or exceeds IEC 61340-5-1 and ANSI/ESD S20.20 minimum requirements for use as a primary grounding method and for charge generation of the footwear-flooring systems. The coating resists abrasion and scuffing in order to maintain ESD performance and appearance. Statguard^® Floor Finish is available in a standard and a Low-VOC formulation. Product is packaged in bag-in-boxes and lot coded for quality control. It has been tested per:

• IEC 61340-2-3
• ANSI/ESD STM7.1 and ESD TR53
• ANSI/ESD STM97.2