Questions And Answers

# List All Questions Search List by Category
Question My company has a 3M conductive floor. Will conductive shoes be an acceptable substitute for heel straps? If so, do you have any suggested sources? - John, Tampa , FL
Answer Yes, conductive shoes can be a good, but expensive substitute for Foot grounders. Assumption: that you are running an ESD Control program for ESDS electronic devices versus for munitions/explosives. Make sure though that the conductive shoes are have at least 800 kilohms of internal resistance for personal safety from an electrical hazard (ideal internal resistance would be 2 megohms). The ESD Floor should be less than 1x10^9 ohms (one billion ohms) to ground.

A pair of ESD shoes can cost over 10 times more than a pair of foot grounders, but may last twice as long. The 5:1 investment ratio of shoes to foot grounders may not be a very economical solution. Foot grounders are also a lot more forgiving in size, fit and flexibility for use.

Either way, ESD Shoes or Foot Grounders can be used with a properly installed ESD floor to complete the mobile grounding system.
Related Categories:
 
If you have found this Q/A useful, please rate it based on its helpfulness.
Rating Rating Rating Rating Rating
This question has been rated: 80%80%80%80%80%
(80% at 1 Ratings)