60358 - CORD, GROUND, FLOOR, 10MM SOCKET, 1 MEG, 3.0M
Internet
List
Pricing
|
|
Fax / Email
List
Price
|
|
|
|
* This is not a formal quote. Prices may change without notice.
Features
- 10 mm (.0395") female snap socket.
Easily snaps to mat stud
- Extra ring terminal included
Provided for customising cord length
- Cord terminated with ring terminal
Allows easy attachment to ESD ground
- Ground cord 3 m long
- Includes 1 Megohm resistor
- Made in the United States of America
Superior Quality
Grounding per EN 61340-5-1 and –2
“An easily accessible dedicated EBP [EPA ground bonding point] for the wrist strap shall be established adjacent to each working area, or working surface. A sufficient number of EBP shall be provided for operators and visitors.” (EN 61340-5-1 section 5.3.3)
“EPA ground cords shall be used to make electrical connections between groundable points and the EPA ground facility.” (EN 61340-5-1 section 5.3.4)
Regarding 1 megohm resistor, “A nominal 1 megohm resistor is commonly used in wrist straps and to ground work surfaces.” [EN 61340-5-2: Section 5.1.1] However, for Working Surfaces, it refers to “it is allowed, when approved by the ESD coordinator, to use surfaces which are “hard ground” i.e. less than 1 X 10^4 ohms to EPA ground.” (EN 61340-5-1 Note 6 of Table 1)
“The EPA ground facility shall be connected to EPA ground and provide a low resistance path to EPA ground (<2 ohms). When available, the mains protective earth shall be used. (EN 61340-5-1 section 5.3.2)
Technical Information
-
60358.E
-
Mat Ground Cord with 10mm Socket