• Automatic Test Range Voltage Selection Compliance Verification required by EN 61340-5-1
  Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 10⁵ ohms
• Portable Operation with 9 Volt Battery
  No charging or sourcing of special batteries needed
• LED Illuminates When Battery Power is Low
  Prevents operator from making bad measurements
• NIST Calibrated – Original Calibration Certificate can be Downloaded Here
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco Europe products, see Calibration.
• Made in the United States of America
• Request a Demo HERE
  
  

“In order to be effective the ESD coordinator needs … access to measuring equipment for the purposes of performing compliance verification measurements as well as testing new ESD products and materials for use in the ESD control program … management should provide the ESD coordinator with the authority and funding necessary to ensure that the ESD control program is maintained and enforced.” [IEC TR 61340-5-2:2018 User guide clause 5.1.2 ESD coordinator]