50681-IONIZER, OVERHEAD, 3 FAN CHARGEBUSTER, 220VAC,  NO CORD

50681-IONIZER, OVERHEAD, 3 FAN CHARGEBUSTER, 220VAC,  NO CORD              

50681 - Chargebuster 3-Fan Overhead Ioniser, No Cord, 220VAC, 94CM

Internet List Price Fax / Email List Price
Qty: 1 $1424.09
Qty: 1 $1566.50

In-stock orders will ship in 3 business days or less after receipt of order.

3 In Stock.

Other Quantities - Contact Us.

Sold Per: EA

Estimated Shipping Weight: 7.12 kg

Stock Location: LETCHWORTH, HERTFORDSHIRE

Tariff No: 85437090

Quantity:
 





Bookmark and Share
  • Shrouded 3 Blade Fan Design with Steady State DC Ionisation
    Allows for better coverage (2’ x 5’), consistent balance ±10 Volts, and superior decay rate (<3 seconds)
  • Auto-Feedback System (Audible And Visual Alarm Through Single Tri-Color LED)
    Unit will automatically shut down and alarm if/when supply voltage drops
  • 120/220 VAC Input Voltage Selectable
    Unit can we used with 110V or 220V power sources
  • 3 Position Fan Speed: Low, Medium, High
    Ionisation performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
  • Replaceable Emitter Pins
    Field replaceable emitter pins allow for minimal downtime
  • Made in the United States of America
  • Low Ozone Emissions – tests well below the OSHA limit of 0.05 ppm ozone
  • No power cord included.
    Choose from 200220 or 200225
  • Request a Demo HERE

“Ionizers should be considered as a method for charge neutralization in cases where grounding cannot be achieved. These may include localized (bench) ionized air blowers, compressed air ionizers, spot ionizers, tape dispenser ionizers and total room ionizers.” “Air ionization can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When a static charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionized air. Note that ionization systems should not be used as a primary means of charge control on conductors or people. As with all ionizers, periodic maintenance will be needed to provide optimum performance.” (EN 61340-5-2 paragraph 5.2.9)

 

“Various feedback and auto balance techniques are available to ensure ionizer performance. … Providing a sensor for each ionizing device can improve feedback control. Effective control can reduce the amount of necessary maintenance. (EN 61340-5-2 paragraph 5.2.9.2 Monitoring and feedback control)

Show more details...
Hide details...
  • TB-6545 - Overhead Ionizer - Installation, Operation, and Maintenance

Why Use Ionisers?

Need to learn more about Ionisation?
Read When do you need Ionisation?.

Need help choosing the right ioniser?
Compare Desco Europe ionisers using the Desco Europe Ioniser Selection Chart.