228081-ROLL, STATFREE DLR2, RUBBER, BEIGE, 2 LAYER, 2MM x 1M x 10M              

228081 - Statfree® DLR2 Beige 2-Layer Rubber Roll, 2mm x 1m x 10m

Internet List Price Fax / Email List Price
Qty: 1 $679.55
Qty: 1 $747.51

In-stock orders will ship in 3 business days or less after receipt of order.

0 In Stock.

Other Quantities - Contact Us.

Estimated Lead-Time: 5 Weeks

Sold Per: RL

Estimated Shipping Weight: 30.00 kg


Tariff No: 40169100

This item is built-to-order. Please contact Customer Service for accurate Lead-Times. Orders will be accepted for a minimum of 1. Orders for built-to-order items cannot be cancelled.


Bookmark and Share
  • Two-layer rubber, static dissipative coloured top and more conductive black bottom
  • Solder iron resistant and withstands most chemicals
  • Ground snap and ground cord not included – see Worksurface Grounding
  • Easy to clean
  • Low reflecting
  • Ideal mat to use with constant monitors



  • Rp-p Top Colour Layer: 1 x 106 to < 1 x 109 ohms meets EN 61340-5-1
  • Rp-p Bottom Black Layer: < 1 x 106 ohms meets EN 61340-5-1
  • Rg: 1 x 106 to < 1 x 108 ohms meets EN 61340-5-1
  • Abrasion (ISO 4649, method A): less than 200mm3
  • Chemical (EN 423): resistant to chemical agents normally used for maintenance
  • Thickness: 2mm (±5%)
  • Hardness (ISO 7619): 75 ± 5 shore A
  • Weight: 2.7 kg/m2
  • Colours: beige
  • Corners: square


"The main purpose of a properly grounded work surface is to ensure that the items being handled and the work area are at the same electrical potential. Work surfaces provide the following functions: - a work surface designed for control of static electricity provides an electrical path to ground or a common connection point in the case of an equipotential bonding situation. This allows non-insulative items placed on the work surface to discharge in a controlled manner; - the work surface in some cases may define the boundary of an ESD work area in which ESDS can be handled." [CLC/TR 61340-5-2 User guide Clause General remarks]
"The most important functional consideration for work surfaces is the resistance from the top of the surface to the groundable point. This establishes the resistance of the primary path to ground for items place on the surface. IEC 6134-5-1 has set a resistance to ground range for work surfaces of less than 1,0 x 109W." [CLC/TR 61340-5-2 User guide Clause Electrical considerations]


Due to variations in computer monitor displays, colour shown may not be exact. For true accurate color, please request an actual sample.
Show more details...
Hide details...
  • TB-7505 - Installation and Maintenance of ESD Protective Work Surfaces
  • 228077 - Statfree DLR2™ Material, 2mm Rubber Bench Matting

Need help choosing the right working surface mat?
Compare Desco Europe working surface mats using the Desco Europe Working Surface Mat Selection Chart.