• Ideal in packaging for container sealing, static shielding bag closure, and holding DIP tubes
• Ideal for conformal coating or holding and sealing supplies in manufacturing
• Ideal for holding notes, work orders or instructions in offices, antistatic work surfaces, or for general purpose third hand use
• Prevents damage to sensitive electronic components in manufacturing
• Secure (bundle) IC DIP tubes
• For general purpose ESD tape applications
• Use with ESD symbols and/or yellow stripe for ESD awareness
• Ideal for sealing ESD bags and other ESD packaging/containers
• Lead-free RoHS compliant

Specifications:

• Thickness
  2.4 mil (0.06mm)
• Film construction
  Cellulose
• Adhesive
  Rubber based - non-staining, absorbs moisture
• Adhesive surface resistance
  10E10 - 10E11 Ohms
• Temperature Range
  -10°C - 71°C (14°F - 160°F) 100°C for 10 minutes max - MIL-B-81705
• Colour
  Transparent
• Roll Length
  32.9m (2.54cm core); 65.8m (7.62cm core)
• Elongation
  25%
• Tensile Strength
  25 lbs/in²
• Adhesion Strength
  40 Oz/in²
• Surface Resistance (73°F, 45% RH)
  10E10 - 10E11 Ohms - ASTM-D-257
• Static Generation from conductive plastic (73°F, 45% RH)
  80 volts average
• Static Generation from roll (73°F, 45% RH)
  50 volts average
• Meets government specs
  CID-A-A-113C, Type 1 Class A

"All generators of electrostatic charges, such as untreated plastic films, foams, synthetic fibres, adhesive tapes, etc., must be prohibited and should be kept away from the EPA (ESD protected area)." (EN 61340-5-2 section 6)

"EPA should never have any electrostatic generative adhesive tapes or labels, as these can cause very high potentials when applied or stripped off." (EN 61340-5-1 section 7.4)