Statguard® Low Residue Floor Stripper is a strong, nonammoniated, phosphate-free floor stripper. Its clear, mild pH formulation is designed to break up and lift multiple layers of Statguard® floor finish. Statguard® Low Residue Floor Stripper is designed specifically for use with the Statguard® Static Dissipative Floor Finishes and similar polymer type floor finishes. The mild pH formulation is non-ammoniated, phosphate-free, and biodegradable. Excellent removability properties enable the stripper to break up and lift multiple layers of static dissipative (ESD) type floor finish when used on vinyl, concrete, rubber, terrazzo, quarry tile, brick, slate, and unglazed ceramic. It is not recommended for use on asphalt tile, linoleum and Dutch linoleum floors; test for bleaching on a small area first. Use in a well ventilated area. Coverage is 400 sq. ft. per gallon (9.8 sq. metres per litre) of concentrate, when diluted to a 3:1 ratio.

• Non-ammoniated and phosphate-free
  Environmentally safe, biodegradable
• Low pH formulation
  Designed to break up and lift multiple layers of Statguard® Floor Finish
• Strips floor finish from vinyl, VCT, concrete, rubber, terrazzo, quarry tile, brick, slate and unglazed ceramic
• Coverage
  9.8 square metres per litre of concentrate, when diluted to a 3:1 ratio
• Multiple uses
• Bag-in-box packaging
• Lead-free RoHS 2 compliant
• Made in the United States of America

“When the use of a wrist strap system is impractical, the [ESD] floor and [ESD] footwear shall be the primary means of ESD control.” (EN 61340-5-1 clause 5.5 EPA working practices)
When ESD footwear is used, it should be noted that ESD footwear alone cannot achieve protection, but needs to be used in conjunction with a suitable ESD floor. (EN 31340-5-2 clause 5.2.8 Footwear)