• Static Dissipative Zinc Free Floor Finish
  Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (10⁷ - 10⁹ ohms) Coating
  Meets EN 61340-5-1 flooring required limit Rg 1 x 10⁷ to < 1 x 10⁹ ohms per IEC 61340-4-1 at 50 % RH
• Low Tribocharging (<100 volts) Coating - IEC 61340-4-5
  Body voltage much lower than < 100 volt requirement EN 61340-5-1 Table 2 Person/footwear / flooring system
• Low-VOC
  Meets CARB and other regional VOC requirements
• 23 % Solids- 2 Coat System**
  Reduces labor needed for initial install and on-going maintenance of the floor
• Better Hardness vs. Leading Competition
  Resists wear in order to maintain ESD performance longer
• UL Listed for Slip Resistance
  Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
• Bag-In-Box Packaging
• Lead-free RoHS Compliant
• Trouble shoot common floor care problems. Click HERE.
• Made In America
  

*Statguard® Low-VOC does not contain harmful chemicals:

• NO APE (alkylphenol ethoxylates) surfactants
• NO Carcinogens, Mutagens, or Reproductive Toxins
• NO Ozone-depleting compounds
• NO Ammonia
• NO Heavy metals (Zinc Free)
• NO Flammable components
• NO Components toxic to aquatic life

**Some extra high traffic areas may require an initial 3 coat application.