• Size: 15l
• Colour: light grey
• One coat system saves labor
• The only conductive ONE COAT 2-part epoxy on the market
• Epoxy is a tight cross-linking thermosetting epoxide polymer providing superior toughness and durability
• Water based, safe for use and shipment
• 4 gallon kit with pre-measured part A and  B, just add together and mix
• Thin mil system allows for easy repair for damaged areas
• ESD floor meets ANSI/ESD S20.20 tested per ESD S7.1.
• Electrical Properties: Rtt: 1 x 10⁴ to < 1 x 10⁷ ohms per IEC 61340-4-1 Rtg: 1 x 10⁴ to < 1 x 10⁷ ohms per IEC 61340-4-1

• When using on a bare or prepped concrete surface a compatible primer such as Baril High Build 1100 Series Epoxy Primer or Sherwin Williams Tred Plex Primer B90W110 should be used to achieve proper performance of the Statguard® Conductive Epoxy properties.
• Made in the United States of America

Click HERE to request a sample of our Epoxy. Let us help you perform a Test Patch before you purchase.

“Permanent materials are broadly defined as floor coverings, including rubber or vinyl tile and sheet goods, epoxy coatings, high-pressure laminates, and carpet. As a group, these materials have an extended use life and provide protection over a broad physical area. [CLC/TR 61340-5-2:2008 User guide section 4.7.3.6.1 Permanent floor materials]
“Paints and epoxy coatings are applied to concrete floors in thin coats. The primary advantages of these materials are their ease of application and coverage over a wide area. They have a longer usable life than do floor finishes …” [CLC/TR 61340-5-2:2008 User guide section 4.7.3.6.2.4 Paints and coatings]