19343-MINI MONITOR, 10MM, WITH UNIVERSAL POWER ADAPTER

19343-MINI MONITOR, 10MM, WITH UNIVERSAL POWER ADAPTER 19343-MINI MONITOR, 10MM, WITH UNIVERSAL POWER ADAPTER              

19343 - Mini Monitor with 10 mm ParkSnap™ and Snap Adapter, with Universal Power Adapter

Internet List Price Email List Price
Qty: 1 $208.42
Qty: 1 $229.26

In-stock orders will ship in 3 business days or less after receipt of order.

Stock: 0

13 Available on 2025-01-10

Other Quantities - Contact Us.

Sold Per: EA

Gross Weight2: 0.34 kg

2The weight listed is gross product weight including standard packaging, actual shipment weight may vary.

Stock Location: LETCHWORTH, HERTFORDSHIRE

Country Of Origin: USA

Tariff No: 90303370

Quantity:
 





Bookmark and Share
  • Single Workstation Continuous Monitor
    Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
  • NEW Illuminated Enclosure¹
    Makes the status of the operator and worksurface highly visible to the operator and supervisor
  • IMPROVED Continuous Visual and Audible Alarms
    Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs; illuminates blue to indicate standby mode
  • NEW Park Delay Timer and ParkSnap™
    Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
  • NEW Mat Monitor Switch
    Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
  • NEW Audible Alarm Adjustment
    Sets the audible alarm volume from loud to louder
  • Wave Distortion Technology
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground² and the presence of its 1 megohm safety resistor
  • Threaded Worksurface Grounding and Mounting
    Grounds and monitors the worksurface with no additional wire
  • Single-Wire Impedance Design
    Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 Volt Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • <50 Millisecond Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Desco Europe 19344 Ring Magnets
    Mounts the monitor in areas without a worksurface
  • Calibration Verification
    Use the Desco Europe 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
  • NIST Calibrated – Original Calibration Certificate can be Downloaded Here
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco Europe products, see Calibration.
  • 100-240VAC Power Adapter with IEC C14 Style Inlet
    Connects to a power cord with a IEC C13 outlet connector
  • Power cord sold separately
    • 200220 Power Cord, Europe Plug
    • 200225 Power Cord, UK Plug
  • Made in the United States of America

 

¹Patent pending

 

²The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.

Show more details...
Hide details...
  • TB-3098.E - Mini Monitor: Installation, Operation and Maintenance

Mini Monitor Installation Tutorial | Desco Europe

Mini Monitor Product Tutorial | Desco Europe

What is Wave Distortion Technology? | Desco Europe

Need help choosing the right continuous workstation monitor?
Compare Desco Europe continuous workstation monitors using the Desco Europe Continuous Workstation Monitor Selection Chart.