Desco Europe ESD - Creating an ESD Floor is as easy as 1, 2, 3 with Statguard® Floor Maintenance Products

Statguard^® Floor Care System

     Unlocks our ESD polymers with the least amount of labour while minimising the pH level needed to rinse and
     neutralise. The Statguard^® Stripper can save one or two labour rinse steps which cuts down labour time and can save
     you money. Typically 80% of the cost of maintaining a tile floor is labour. Cutting down the labour time is a savings to
     both the Building Service Contractor and the Customer.

2. Statguard^® Neutraliser

     Saves rinse steps to bring your stripped floor to the correct pH level before you apply our Statguard^® Dissipative Floor
     Finish. Again, saving steps is saving time and cost. Reaching the correct pH level ensures the proper hardening of our
     finish and will help extend the life of the floor.

3. Statguard^® Dissipative Floor Finish

     Exceeds the required limits of EN 61340-5-1 for Resistance (operator grounding) of <1.0 x 10⁹ ohms when tested per
     IEC 61340-4-1 and Operator Charge Generation of < 100 volts when tested per IEC 61340-4-1 when proper ESD
     footwear is used.