Controlling Process Necessary Insulators and Isolated Conductors in the EPA

Desco Europe's Ionisers neutralise electrostatic charges on insulators and isolated (non-grounded) conductors to reduce the magnitude of electrostatic discharges (ESD) in the ESD Protected area (EPA). Point-of-use compressed gas ionisers, also known as ioniser guns, combat electrostatic attraction (ESA) by neutralising charges on surfaces and particles that otherwise cause contamination or visual defects on a product. 

New Ionisation Test Kit

Digital Static Field Meter Ionisation Kit

The Desco 19442 Digital Static Field Meter indicates surface voltage and polarity on objects. The meter has a measurement range of 0 to ±19.99 kV at a distance of 1 inch and a measurement accuracy of ±5%. It utilises a chopper-stabilised sensor for use in both normal and ionised environments. The meter's enclosure is dissipative and features a 7 mm snap and ground cord for bonding to equipment ground.

EM Aware

EM Aware Monitor With Ethernet Output

The SCS 770066 EM Aware Monitor monitors three key parameters that keep you aware of critical symptoms of ESD problems: ESD events, change in static voltage field, and ioniser performance. The thresholds for these parameters are fully adjustable. The monitor is constructed of an aluminium enclosure, LCD display, control joystick, remote antenna, relay terminal and Ethernet connectivity.

Emitter Point Tip Cleaner

Emitter Point Tip Cleaner

Keep the emitter points cleaned and maintained using the 60506 Emitter Point Cleaners. Per IEC TR 61340-5-2:2018, 5.3.3.4.6.16.1.1 "All ionization devices will require periodic maintenance for proper operation. Maintenance intervals for ionizers vary widely depending on the type of ionization equipment and use environment... Routine service is typically required to meet quality compliance verification requirements."