222642 - Surface Resistance Meter Kit

Sale Price List Price
Qty: 1 $1513.11
Qty: 1 $1664.42

In-stock orders will ship in 3 business days or less after receipt of order.

2 In Stock.

Other Quantities - Contact Us.

Sold Per: EA

Estimated Shipping Weight: 5.98 kg



Bookmark and Share
  • NEW Enclosure with Rubber Grip Edges

Thinner and narrower design is easier to hold and provides protection from drops.

  • NEW Quick Check Button

Enable this switch to perform quick resistance measurements without the 15-second period for temperature and humidity measurements.

  • NEW Battery Compartment

Easy-to-access compartment without the need for tooling or probes.

  • Digital Compliance Verification Surface Resistance Meter Kit*

Measures resistance point-to-point(Rtt) or surface to ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents.

  • Resistance Range: Greater Than 1.0 x 103 ohms to Less Than 1.0 x 1012 (+/-10% Accuracy)

Determines if a surface is dissipative, conductive, or insulative for ESD control applications in electronics manufacturing or handling environments.

  • Under Load Test Voltages (10V or 100V ±5%)

Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification.

  • Selectable Test Voltage

Switches to appropriate test voltage (10V for tests <1 x 106 or 100V for tests >1 x 106) in AUTO mode or may be fixed to at 10V in HOLD mode.

  • Ohm Values are Expressed with a Digital Mantissa and LED Exponent

Provides an easy to read and accurate measurement.

  • Pre-set 15 Second Electrification Period in Full Test Mode

Meets the requirements of the ANSI/ESD S4.1 testing requirements.

  • Temperature (Fahrenheit and Celsius) and Relative Humidity Measurements

Measures temperature and relative humidity (during 15 second electrification period) as required by ANSI/ESD S20.20.

  • NIST Calibrated with Certificate

Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Vermason products, see Calibration.

  • Prior item number: 222630
  • Made in the United States of America
  • Request a Demo HERE

*222642 Digital Surface Resistance Meter Kit

1 Digital Surface Resistance Meter

2 Shielded Test Leads, 1.5m Length

2 Five Pound Electrodes

2 AA Alkaline Batteries 

1 Gator Clip

1 Plastic Carrying Case

1 Certificate of Calibration


For Digital Surface Resistance Meter only see 222643


Show more details...
Hide details...
  • TB-7588 - Digital Surface Resistance Meter Kit: Installation, Operation and Maintenance

Vermason Digital Surface Resistance Meter